Block paving driveways in Ryde: the local picture
In and around Ryde, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
Work in the Isle of Wight is by arrangement: we confirm availability and any travel charge before a visit, and many jobs can be priced from photos first.
How much does a block paved driveway cost in Ryde?
In the South East, a block paved driveway usually costs £90–£150 per m² including VAT. For a 50 m² double drive, that is roughly £4,600–£7,550. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £90–£150 per m² |
| Breaking out an old surface | £11–£45 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £380–£1,100 |
| Dropped kerb (vehicle crossover) construction | £1,100–£3,250 |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our block paved driveways service
A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.
- Survey, measurements and a written, itemised quote
- Sharp-sand laying course screeded to falls
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
- Blocks laid in your chosen pattern, with a contrasting border if wanted
- Removal of the old surface and soil to the agreed depth, with waste taken away
What the survey covers
- Whether front-garden planning rules apply
- Steps, thresholds and door heights
- Where rain will go: falls, lawn, border, channel or soakaway
- Block range, thickness, colour and pattern to suit the house
- Access for a mini-digger, skip or grab lorry
Planning and kerb rules in Ryde
Ryde is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Block paved driveways in Ryde: questions
Do you cover Sandown, Newport, Isle of Wight and Cowes?
Yes. We cover Ryde and the places around it, including Sandown, Newport, Isle of Wight and Cowes, and the rest of the Isle of Wight.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
How much does a block paved driveway cost in Ryde?
Our guide for Ryde is £90–£150 per m² including VAT, so a 50 m² double drive is usually about £4,600–£7,550. Your fixed price follows the survey.
Do I need planning permission for a block paved driveway in Ryde?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Block paved driveways near Ryde
Nearby towns we cover for block paved driveways, and block paved driveways across Isle of Wight:
- Block paved driveways in Sandown
- Block paved driveways in Newport, Isle of Wight
- Block paved driveways in Cowes
