Isle of Wight · Block paved driveways

Block paving driveways in Sandown

Thinking about block paved driveways in Sandown? We survey, specify and build them for homeowners across Sandown and the surrounding PO postcodes, with the dig depth, sub-base, edging and drainage written into your quote.

  • Postcodes PO36, PO37, PO35
  • £90–£150 per m² inc VAT
  • By arrangement
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

What to know before a block paved driveway in Sandown

Around Sandown, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

Work in the Isle of Wight is by arrangement: we confirm availability and any travel charge before a visit, and many jobs can be priced from photos first.

How much does a block paved driveway cost in Sandown?

Guide price in Sandown£90–£150 per m²Including VAT at 20%

In the South East, a block paved driveway usually costs £90–£150 per m² including VAT. For a 50 m² double drive, that is roughly £4,600–£7,550. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£90–£150 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.

  • Removal of the old surface and soil to the agreed depth, with waste taken away
  • Crushed-stone sub-base laid in layers and compacted
  • Edge restraints or kerbs bedded and haunched in concrete
  • Sharp-sand laying course screeded to falls
  • Blocks laid in your chosen pattern, with a contrasting border if wanted

Before we price your block paved driveway

  • Existing manhole and inspection covers, and whether to recess them
  • The kerb: is it already dropped, and is it wide enough?
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Access for a mini-digger, skip or grab lorry
  • Where an electric vehicle charger cable might run

Rules for front drives in Sandown

Sandown is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

What you can expect from us

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Block paved driveways in Sandown: questions

Do you cover Ryde, Newport, Isle of Wight and Cowes?

Yes. We cover Sandown and the places around it, including Ryde, Newport, Isle of Wight and Cowes, and the rest of the Isle of Wight.

Do I need planning permission for a block paved driveway in Sandown?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Is the survey in Sandown free?

In the Isle of Wight we cover jobs by arrangement. We will confirm before any visit whether a charge applies, and many jobs can be priced from photos first.

How much does a block paved driveway cost in Sandown?

Our guide for Sandown is £90–£150 per m² including VAT, so a 50 m² double drive is usually about £4,600–£7,550. Your fixed price follows the survey.

Block paved driveways near Sandown

Nearby towns we cover for block paved driveways, and block paved driveways across Isle of Wight:

Other block paving services in Sandown

Or see all block paving services in Sandown.

Next step

Get a guide price in two minutes

Ready to talk about your block paved driveway? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote