Planning a replacement block drive in Cowdenbeath
Around Cowdenbeath, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a replacement block drive cost in Cowdenbeath?
For Cowdenbeath, our guide is £95–£180 per m² including VAT, so a 45 m² replacement drive is likely to be £4,300–£8,100. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £95–£180 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Assessment of the old base: keep, top up or replace
- Break-out of the old surface with waste removal and skip or grab lorry
- Drainage added where the old drive sent water to the house or road
- New edging, sub-base where needed, and the block drive
- Levels set below the damp-proof course with falls away from the house
What the survey covers
- The kerb: is it already dropped, and is it wide enough?
- Where rain will go: falls, lawn, border, channel or soakaway
- Block range, thickness, colour and pattern to suit the house
- Where an electric vehicle charger cable might run
- Existing manhole and inspection covers, and whether to recess them
Do you need permission in Cowdenbeath?
Cowdenbeath is in Scotland, so these rules apply:
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Replace an old drive in Cowdenbeath: questions
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Can you match the blocks to my house in Cowdenbeath?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do I need planning permission for a replacement block drive in Cowdenbeath?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
Replace an old drive near Cowdenbeath
Nearby towns we cover for replace an old drive, and replace an old drive across Fife:
- Replace an old drive in Dunfermline
- Replace an old drive in Dalgety Bay
- Replace an old drive in Rosyth
- Replace an old drive in Kirkcaldy
- Replace an old drive in Glenrothes
- Replace an old drive in Methil
