County Down · Replace an old drive

Replacing tarmac or concrete with block paving in Downpatrick

From BT30 to the villages around Downpatrick, we quote replacement block drives built to one written specification, so you know exactly what is going under the blocks.

  • Postcodes BT30
  • £90–£170 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Downpatrick

Downpatrick is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Wet winters in Northern Ireland make falls, edge restraints and full joints especially important.

How much does a replacement block drive cost in Downpatrick?

Guide price in Downpatrick£90–£170 per m²Including VAT at 20%

In Northern Ireland, a replacement block drive usually costs £90–£170 per m² including VAT. For a 45 m² replacement drive, that is roughly £4,050–£7,700. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£90–£170 per m²
Breaking out an old surface£9.50–£40 per m²
Edging or kerb, bedded and haunched£19–£50 per metre
Typical channel drain run£330–£950
Dropped kerb (vehicle crossover) construction£950–£2,850

Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • New edging, sub-base where needed, and the block drive
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Drainage added where the old drive sent water to the house or road
  • Assessment of the old base: keep, top up or replace
  • Levels set below the damp-proof course with falls away from the house

What we check on a Downpatrick survey

  • Steps, thresholds and door heights
  • Trees and roots near the drive
  • The kerb: is it already dropped, and is it wide enough?
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Access for a mini-digger, skip or grab lorry

Rules for front drives in Downpatrick

Downpatrick is in Northern Ireland, so these rules apply:

In Northern Ireland, a hard surface between the front of the house and the road that covers or replaces more than 5 m² must be porous or permeable, or drain to a permeable area within the property, to be permitted development.

Hard surfaces within the grounds of a listed building need listed building consent. Planning is handled by your district council, so check with its planning office if you are unsure.

Dropped kerbs in Northern Ireland are approved by DfI Roads (the Department for Infrastructure), not the council; check planning separately with the council.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

What you can expect from us

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Replace an old drive in Downpatrick: questions

How much does a replacement block drive cost in Downpatrick?

Our guide for Downpatrick is £90–£170 per m² including VAT, so a 45 m² replacement drive is usually about £4,050–£7,700. Your fixed price follows the survey.

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Can you match the blocks to my house in Downpatrick?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Replace an old drive near Downpatrick

Nearby towns we cover for replace an old drive, and replace an old drive across County Down:

Other block paving services in Downpatrick

Or see all block paving services in Downpatrick.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote