How much does a replacement block drive cost in County Down?
Expect replacement block drives in County Down to come in at around £90–£170 per m², including VAT at 20%. As an example, a 45 m² replacement drive usually comes to between £4,050 and £7,700.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £90–£170 per m² |
| Breaking out an old surface | £9.50–£40 per m² |
| Edging or kerb, bedded and haunched | £19–£50 per metre |
| Typical channel drain run | £330–£950 |
| Dropped kerb (vehicle crossover) construction | £950–£2,850 |
Guide figures for Northern Ireland, checked 9 November 2026.
Towns we cover in County Down
Choose a town for local prices and details for replace an old drive:
- Bangor, County Down
- Newtownards
- Newry
- Banbridge
- Dundonald
- Holywood
- Downpatrick
- Comber
- Carryduff
- Warrenpoint
- Newcastle
- Donaghadee
What is included?
Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.
Wet winters in Northern Ireland make falls, edge restraints and full joints especially important.
- Assessment of the old base: keep, top up or replace
- New edging, sub-base where needed, and the block drive
- Break-out of the old surface with waste removal and skip or grab lorry
- Drainage added where the old drive sent water to the house or road
- Levels set below the damp-proof course with falls away from the house
What the survey covers
- Trees and roots near the drive
- Ground conditions under the old surface and how deep the sub-base must be
- Access for a mini-digger, skip or grab lorry
- Existing manhole and inspection covers, and whether to recess them
- Edges against lawns, beds, walls and neighbours
Rules for front drives in County Down
In Northern Ireland, a hard surface between the front of the house and the road that covers or replaces more than 5 m² must be porous or permeable, or drain to a permeable area within the property, to be permitted development.
Hard surfaces within the grounds of a listed building need listed building consent. Planning is handled by your district council, so check with its planning office if you are unsure.
Dropped kerbs in Northern Ireland are approved by DfI Roads (the Department for Infrastructure), not the council; check planning separately with the council.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Replace an old drive in County Down: questions
How much does a replacement block drive cost in County Down?
Our guide for County Down is £90–£170 per m² including VAT, so a 45 m² replacement drive is usually about £4,050–£7,700. Your fixed price follows the survey.
Do you cover Bangor, County Down, Newtownards and Newry?
Yes. We cover all of County Down, including Bangor, County Down, Newtownards and Newry.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Can you match the blocks to my house in County Down?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
