County Down · Lift and re-lay

Lift and re-lay block paving in Downpatrick

If your drive or patio in Downpatrick has dips, ruts or broken blocks, we can usually re-use your own blocks so the repair matches.

  • Postcodes BT30
  • £35–£75 per m² inc VAT
  • Free survey for new paving
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

Lift and re-lay block paving in Downpatrick: the local picture

Downpatrick is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Wet winters in Northern Ireland make falls, edge restraints and full joints especially important.

How much does a lift and re-lay job cost in Downpatrick?

Guide price in Downpatrick£35–£75 per m²Including VAT at 20%

Guide price in Downpatrick: £35–£75 per m² including VAT, which puts 30 m² re-laid at about £1,000–£2,300. These are Northern Ireland guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Lift and re-lay on a sound base£35–£75 per m²
Small repair (a few blocks or a short trench)£190–£620
Sunken or rutted patch repaired£285–£1,150
Lift and re-lay with sub-base rebuilt£55–£105 per m²

Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Lift and re-lay means taking up an existing block paved area, cleaning and stacking the blocks, correcting the bed and the sub-base, and laying the same blocks back down. When the blocks are still sound, it fixes widespread sinking, rocking and uneven joints for less than a new drive, because the blocks themselves are re-used.

  • Jointing sand and compaction
  • Blocks relaid, new cuts made, edges re-set
  • Lifting, cleaning and stacking
  • Sub-base repaired or rebuilt where needed
  • New screeded laying course

What we look at first in Downpatrick

  • Whether a drain or gully is leaking under the paving
  • What caused the dip or movement: base, laying course, edging or drains
  • Trees, roots and past trenches
  • Condition and thickness of your existing blocks
  • Whether the edging has moved or was never set in concrete

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

What you can expect from us

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Lift and re-lay in Downpatrick: questions

Do you cover Newcastle, Carryduff and Comber?

Yes. We cover Downpatrick and the places around it, including Newcastle, Carryduff and Comber, and the rest of County Down.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Can you repair block paving in Downpatrick without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Lift and re-lay near Downpatrick

Nearby towns we cover for lift and re-lay, and lift and re-lay across County Down:

Other block paving services in Downpatrick

Or see all block paving services in Downpatrick.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Downpatrick, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote