Planning a permeable block drive in Pudsey
Pudsey is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Yorkshire has everything from stone-built terraces to large new estates, so block choice often follows the house: clay or tumbled blocks for older homes, crisp concrete for newer ones.
How much does a permeable block drive cost in Pudsey?
Most permeable block drive quotes in Yorkshire and the Humber fall within £95–£155 per m² including VAT. A 50 m² drive would usually be about £4,750–£7,650, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £95–£155 per m² |
| Breaking out an old surface | £9–£35 per m² |
| Edging or kerb, bedded and haunched | £18–£45 per metre |
| Typical channel drain run | £320–£900 |
| Dropped kerb (vehicle crossover) construction | £900–£2,700 |
Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Grit laying course and permeable blocks with grit-filled joints
- Open-graded crushed stone (no fines) laid and compacted in layers
- Geotextile layer where the design needs one
- Edge restraints and any overflow or outlet the design needs
- Deeper dig-out for the open-graded sub-base
What the survey covers
- Where an electric vehicle charger cable might run
- Access for a mini-digger, skip or grab lorry
- Edges against lawns, beds, walls and neighbours
- Steps, thresholds and door heights
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
Rules for front drives in Pudsey
Pudsey is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Permeable paving in Pudsey: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do I need planning permission for a permeable block drive in Pudsey?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
How much does a permeable block drive cost in Pudsey?
Our guide for Pudsey is £95–£155 per m² including VAT, so a 50 m² drive is usually about £4,750–£7,650. Your fixed price follows the survey.
Permeable paving near Pudsey
Nearby towns we cover for permeable paving, and permeable paving across West Yorkshire:
- Permeable paving in Bradford
- Permeable paving in Morley
- Permeable paving in Leeds
- Permeable paving in Yeadon
- Permeable paving in Shipley
- Permeable paving in Cleckheaton
