How much does a permeable block drive cost in West Yorkshire?
Expect permeable block drives in West Yorkshire to come in at around £95–£155 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £4,750 and £7,650.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £95–£155 per m² |
| Breaking out an old surface | £9–£35 per m² |
| Edging or kerb, bedded and haunched | £18–£45 per metre |
| Typical channel drain run | £320–£900 |
| Dropped kerb (vehicle crossover) construction | £900–£2,700 |
Guide figures for Yorkshire and the Humber, checked 9 November 2026.
Towns we cover in West Yorkshire
Choose a town for local prices and details for permeable paving:
- Leeds
- Bradford
- Huddersfield
- Wakefield
- Halifax
- Dewsbury
- Morley
- Keighley
- Castleford
- Pontefract
- Yeadon
- Brighouse
- Shipley
- Cleckheaton
- Pudsey
- Lofthouse
- Ossett
- Guiseley
What does a permeable block drive involve?
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
Yorkshire has everything from stone-built terraces to large new estates, so block choice often follows the house: clay or tumbled blocks for older homes, crisp concrete for newer ones.
- Grit laying course and permeable blocks with grit-filled joints
- Ground check: how well the soil drains and how high the water table sits
- Open-graded crushed stone (no fines) laid and compacted in layers
- Deeper dig-out for the open-graded sub-base
- Geotextile layer where the design needs one
What the survey covers
- The kerb: is it already dropped, and is it wide enough?
- Trees and roots near the drive
- Ground conditions under the old surface and how deep the sub-base must be
- Where an electric vehicle charger cable might run
- Existing manhole and inspection covers, and whether to recess them
Rules for front drives in West Yorkshire
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Permeable paving in West Yorkshire: questions
How much does a permeable block drive cost in West Yorkshire?
Our guide for West Yorkshire is £95–£155 per m² including VAT, so a 50 m² drive is usually about £4,750–£7,650. Your fixed price follows the survey.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do I need planning permission for a permeable block drive in West Yorkshire?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Do you cover Leeds, Bradford and Huddersfield?
Yes. We cover all of West Yorkshire, including Leeds, Bradford and Huddersfield.
