West Glamorgan · Permeable paving

Permeable block paving in Briton Ferry

We quote permeable block drives throughout Briton Ferry and West Glamorgan. The survey sets the depth of dig and the drainage; the pattern and colour are your choice.

  • Postcodes SA12, SA13
  • £100–£160 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

What to know before a permeable block drive in Briton Ferry

In Briton Ferry, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.

How much does a permeable block drive cost in Briton Ferry?

Guide price in Briton Ferry£100–£160 per m²Including VAT at 20%

For Briton Ferry, our guide is £100–£160 per m² including VAT, so a 50 m² drive is likely to be £4,900–£7,900. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Permeable block paving driveway£100–£160 per m²
Breaking out an old surface£9.50–£35 per m²
Edging or kerb, bedded and haunched£19–£45 per metre
Typical channel drain run£330–£930
Dropped kerb (vehicle crossover) construction£930–£2,800

Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our permeable paving service

Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.

  • Open-graded crushed stone (no fines) laid and compacted in layers
  • Grit laying course and permeable blocks with grit-filled joints
  • Edge restraints and any overflow or outlet the design needs
  • Geotextile layer where the design needs one
  • Deeper dig-out for the open-graded sub-base

What the survey covers

  • Existing manhole and inspection covers, and whether to recess them
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Where an electric vehicle charger cable might run
  • Edges against lawns, beds, walls and neighbours
  • Trees and roots near the drive

Do you need permission in Briton Ferry?

Briton Ferry is in Wales, so these rules apply:

In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.

Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.

A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Permeable paving in Briton Ferry: questions

Can you match the blocks to my house in Briton Ferry?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

How much does a permeable block drive cost in Briton Ferry?

Our guide for Briton Ferry is £100–£160 per m² including VAT, so a 50 m² drive is usually about £4,900–£7,900. Your fixed price follows the survey.

How long does a permeable block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Permeable paving near Briton Ferry

Nearby towns we cover for permeable paving, and permeable paving across West Glamorgan:

Other block paving services in Briton Ferry

Or see all block paving services in Briton Ferry.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Briton Ferry, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote