What to know before a block paved driveway in Briton Ferry
Briton Ferry is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
How much does a block paved driveway cost in Briton Ferry?
Guide price in Briton Ferry: £80–£130 per m² including VAT, which puts a 50 m² double drive at about £3,950–£6,500. These are Wales guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £80–£130 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our block paved driveways service
A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.
- Removal of the old surface and soil to the agreed depth, with waste taken away
- Cuts at edges, around covers and against the house
- Edge restraints or kerbs bedded and haunched in concrete
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
- Sharp-sand laying course screeded to falls
Before we price your block paved driveway
- The kerb: is it already dropped, and is it wide enough?
- Where rain will go: falls, lawn, border, channel or soakaway
- Whether front-garden planning rules apply
- Where an electric vehicle charger cable might run
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
Do you need permission in Briton Ferry?
Briton Ferry is in Wales, so these rules apply:
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Block paved driveways in Briton Ferry: questions
Do you cover Neath, Clydach and Swansea?
Yes. We cover Briton Ferry and the places around it, including Neath, Clydach and Swansea, and the rest of West Glamorgan.
How much does a block paved driveway cost in Briton Ferry?
Our guide for Briton Ferry is £80–£130 per m² including VAT, so a 50 m² double drive is usually about £3,950–£6,500. Your fixed price follows the survey.
Do I need planning permission for a block paved driveway in Briton Ferry?
In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Block paved driveways near Briton Ferry
Nearby towns we cover for block paved driveways, and block paved driveways across West Glamorgan:
- Block paved driveways in Neath
- Block paved driveways in Clydach
- Block paved driveways in Swansea
- Block paved driveways in Gorseinon
- Block paved driveways in Pontarddulais
