West Glamorgan · Drive extensions

Block paved driveway extensions in Briton Ferry

From SA12, SA13 to the villages around Briton Ferry, we quote driveway extensions built to one written specification, so you know exactly what is going under the blocks.

  • Postcodes SA12, SA13
  • £85–£140 per m² inc VAT
  • Free survey for new paving
Widened block paved driveway with a new matching section joined to the original drive

What to know before a driveway extension in Briton Ferry

Briton Ferry is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.

How much does a driveway extension cost in Briton Ferry?

Guide price in Briton Ferry£85–£140 per m²Including VAT at 20%

For Briton Ferry, our guide is £85–£140 per m² including VAT, so a 15 m² extension is likely to be £1,450–£2,400. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Driveway extension in block paving£85–£140 per m²
Breaking out an old surface£9.50–£35 per m²
Edging or kerb, bedded and haunched£19–£45 per metre
Typical channel drain run£330–£930
Dropped kerb (vehicle crossover) construction£930–£2,800

Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our drive extensions service

The hard part is the join. Blocks from the same range can differ in shade from a batch made years ago, and older blocks have weathered, so the survey looks at whether a close match is possible, whether lifting and re-mixing some existing blocks will help, or whether a deliberate border or contrasting panel will look better than a near-miss.

  • New edging, kerbs or a low retaining edge where the lawn is cut back
  • Old edge restraint taken out and the new paving toothed into the old pattern
  • Dig-out and sub-base for the new area
  • Check of the existing drive: block range, thickness, levels and condition
  • Matching options: same range, re-mixing old and new, or a planned contrast

What we check on a Briton Ferry survey

  • Steps, thresholds and door heights
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Trees and roots near the drive
  • The kerb: is it already dropped, and is it wide enough?
  • Whether front-garden planning rules apply

Planning and kerb rules in Briton Ferry

Briton Ferry is in Wales, so these rules apply:

In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.

Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.

A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Drive extensions in Briton Ferry: questions

Do you cover Neath, Clydach and Swansea?

Yes. We cover Briton Ferry and the places around it, including Neath, Clydach and Swansea, and the rest of West Glamorgan.

Do I need planning permission for a driveway extension in Briton Ferry?

In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

How much does a driveway extension cost in Briton Ferry?

Our guide for Briton Ferry is £85–£140 per m² including VAT, so a 15 m² extension is usually about £1,450–£2,400. Your fixed price follows the survey.

Drive extensions near Briton Ferry

Nearby towns we cover for drive extensions, and drive extensions across West Glamorgan:

Other block paving services in Briton Ferry

Or see all block paving services in Briton Ferry.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote