What to know before a permeable block drive in Banstead
Banstead is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.
How much does a permeable block drive cost in Banstead?
Guide price in Banstead: £115–£185 per m² including VAT, which puts a 50 m² drive at about £5,650–£9,200. These are South East guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £115–£185 per m² |
| Breaking out an old surface | £11–£45 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £380–£1,100 |
| Dropped kerb (vehicle crossover) construction | £1,100–£3,250 |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What does a permeable block drive involve?
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
- Open-graded crushed stone (no fines) laid and compacted in layers
- Grit laying course and permeable blocks with grit-filled joints
- Edge restraints and any overflow or outlet the design needs
- Ground check: how well the soil drains and how high the water table sits
- Deeper dig-out for the open-graded sub-base
What we check on a Banstead survey
- Existing manhole and inspection covers, and whether to recess them
- Trees and roots near the drive
- Block range, thickness, colour and pattern to suit the house
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Ground conditions under the old surface and how deep the sub-base must be
Do you need permission in Banstead?
Banstead is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Permeable paving in Banstead: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do you cover Ewell, Epsom and Leatherhead?
Yes. We cover Banstead and the places around it, including Ewell, Epsom and Leatherhead, and the rest of Surrey.
Can you match the blocks to my house in Banstead?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How much does a permeable block drive cost in Banstead?
Our guide for Banstead is £115–£185 per m² including VAT, so a 50 m² drive is usually about £5,650–£9,200. Your fixed price follows the survey.
Permeable paving near Banstead
Nearby towns we cover for permeable paving, and permeable paving across Surrey:
- Permeable paving in Ewell
- Permeable paving in Epsom
- Permeable paving in Leatherhead
- Permeable paving in Redhill
- Permeable paving in Reigate
- Permeable paving in Caterham
