Surrey · Lift and re-lay

Lift and re-lay block paving in Banstead

When a block drive in Banstead or nearby Ewell starts to dip or rattle, the blocks are rarely the problem; the bed and base usually are.

  • Postcodes SM7, KT20
  • £40–£85 per m² inc VAT
  • Free survey for new paving
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

Lift and re-lay block paving in Banstead: what to expect

Banstead is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a lift and re-lay job cost in Banstead?

Guide price in Banstead£40–£85 per m²Including VAT at 20%

In the South East, a lift and re-lay job usually costs £40–£85 per m² including VAT. For 30 m² re-laid, that is roughly £1,150–£2,600. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Lift and re-lay on a sound base£40–£85 per m²
Small repair (a few blocks or a short trench)£215–£700
Sunken or rutted patch repaired£320–£1,300
Lift and re-lay with sub-base rebuilt£65–£120 per m²

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What does a lift and re-lay job involve?

It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.

  • Survey of the blocks: thickness, damage and whether they are worth re-using
  • New screeded laying course
  • Jointing sand and compaction
  • Sub-base repaired or rebuilt where needed
  • Blocks relaid, new cuts made, edges re-set

What we look at first in Banstead

  • Whether a drain or gully is leaking under the paving
  • Condition and thickness of your existing blocks
  • Trees, roots and past trenches
  • Falls, so water does not collect again
  • How much of the area needs lifting to blend the repair

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Lift and re-lay in Banstead: questions

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

How much does a lift and re-lay job cost in Banstead?

Our guide is £40–£85 per m² including VAT. Small repairs are often priced from photos.

Can you repair block paving in Banstead without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Lift and re-lay near Banstead

Nearby towns we cover for lift and re-lay, and lift and re-lay across Surrey:

Other block paving services in Banstead

Or see all block paving services in Banstead.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote