Surrey · Cleaning

Block paving cleaning in Banstead

Block paving cleaning in Banstead: done properly, it lifts years of moss and grime and leaves the joints full and tight.

  • Postcodes SM7, KT20
  • £2.50–£5.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Banstead: what to expect

Homes in Banstead include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

How much does a block paving cleaning job cost in Banstead?

Guide price in Banstead£2.50–£5.50 per m²Including VAT at 20%

Expect block paving cleaning jobs in Banstead to come in at around £2.50–£5.50 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £135 and £270.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5.50 per m²
Clean and re-sand£5.50–£11 per m²
Clean, re-sand and seal£8.50–£20 per m²
Sealing only£5.50–£16 per m²

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our cleaning service

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Pre-treatment where needed
  • Optional biocide and sealer
  • Rinse down of edges, steps and walls
  • Rotary surface clean at a pressure that will not blow out the joints

What we look at first in Banstead

  • Walls, doors and planting to protect
  • Moss, algae, weeds and oil staining
  • Which sealer finish suits a slope or patio
  • Type of block and its age
  • Shade and drainage, which affect regrowth

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Cleaning in Banstead: questions

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How often should block paving in Banstead be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Do you cover Ewell, Epsom and Leatherhead?

Yes. We cover Banstead and the places around it, including Ewell, Epsom and Leatherhead, and the rest of Surrey.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Cleaning near Banstead

Nearby towns we cover for cleaning, and cleaning across Surrey:

Other block paving services in Banstead

Or see all block paving services in Banstead.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote