What to know before a permeable block drive in Romford
Across Romford, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.
Many London streets have controlled parking and narrow frontages, so we measure the car space and the crossover before anything else.
How much does a permeable block drive cost in Romford?
Expect permeable block drives in Romford to come in at around £125–£205 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £6,300 and £10,200.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £125–£205 per m² |
| Breaking out an old surface | £12–£50 per m² |
| Edging or kerb, bedded and haunched | £25–£60 per metre |
| Typical channel drain run | £420–£1,200 |
| Dropped kerb (vehicle crossover) construction | £1,200–£3,600 |
Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
- Edge restraints and any overflow or outlet the design needs
- Deeper dig-out for the open-graded sub-base
- Open-graded crushed stone (no fines) laid and compacted in layers
- Grit laying course and permeable blocks with grit-filled joints
- Geotextile layer where the design needs one
What the survey covers
- The kerb: is it already dropped, and is it wide enough?
- Ground conditions under the old surface and how deep the sub-base must be
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Edges against lawns, beds, walls and neighbours
- Block range, thickness, colour and pattern to suit the house
Planning and kerb rules in Romford
Romford is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Permeable paving in Romford: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
How much does a permeable block drive cost in Romford?
Our guide for Romford is £125–£205 per m² including VAT, so a 50 m² drive is usually about £6,300–£10,200. Your fixed price follows the survey.
Can you match the blocks to my house in Romford?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Permeable paving near Romford
Nearby towns we cover for permeable paving, and permeable paving across Greater London:
- Permeable paving in Dagenham
- Permeable paving in Becontree
- Permeable paving in Ilford
- Permeable paving in Barking
- Permeable paving in Thamesmead
- Permeable paving in Leytonstone
