Planning a block paving sealing job in Romford
Romford has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Many London streets have controlled parking and narrow frontages, so we measure the car space and the crossover before anything else.
How much does a block paving sealing job cost in Romford?
In London, a block paving sealing job usually costs £6–£18 per m² including VAT. For a 50 m² drive, that is roughly £300–£900. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £6–£18 per m² |
| Jet wash clean with a rotary cleaner | £3–£6 per m² |
| Clean and re-sand | £6–£12 per m² |
| Clean, re-sand and seal | £9.50–£25 per m² |
Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Second coat where the product requires it
- Drying time and a date when cars can return
- Sealer applied evenly by roller or low-pressure sprayer
- Check that the paving is clean, re-sanded and dry
- Edges, walls and doors protected
What we look at first in Romford
- Shade and drainage, which affect regrowth
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Which sealer finish suits a slope or patio
- Type of block and its age
- Walls, doors and planting to protect
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Sealing in Romford: questions
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How often should block paving in Romford be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving sealing job cost in Romford?
Guide price for Romford: £6–£18 per m² including VAT, with a minimum charge for small areas.
Sealing near Romford
Nearby towns we cover for sealing, and sealing across Greater London:
- Sealing in Dagenham
- Sealing in Becontree
- Sealing in Ilford
- Sealing in Barking
- Sealing in Thamesmead
- Sealing in Leytonstone
