Block paving sealing in Ilford: the local picture
Across Ilford, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.
Front gardens in much of London are short, so parking depth and the dropped kerb usually decide whether a drive is possible.
How much does a block paving sealing job cost in Ilford?
In London, a block paving sealing job usually costs £6–£18 per m² including VAT. For a 50 m² drive, that is roughly £300–£900. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £6–£18 per m² |
| Jet wash clean with a rotary cleaner | £3–£6 per m² |
| Clean and re-sand | £6–£12 per m² |
| Clean, re-sand and seal | £9.50–£25 per m² |
Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing block paving means applying a clear liquid sealer to clean, dry paving. A good sealer soaks into the blocks and the jointing sand, binding the sand so it does not wash out, reducing staining and making the surface easier to keep clean. Some sealers also deepen the colour or leave a light sheen.
- Check that the paving is clean, re-sanded and dry
- Sealer applied evenly by roller or low-pressure sprayer
- Edges, walls and doors protected
- Drying time and a date when cars can return
- Second coat where the product requires it
How we find the cause
- How much joint sand is left
- Moss, algae, weeds and oil staining
- Type of block and its age
- Whether any blocks are loose or sunken first
- Whether the paving is permeable (no sand, no sealing with the wrong product)
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Sealing in Ilford: questions
How often should block paving in Ilford be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How much does a block paving sealing job cost in Ilford?
Guide price for Ilford: £6–£18 per m² including VAT, with a minimum charge for small areas.
Sealing near Ilford
Nearby towns we cover for sealing, and sealing across Greater London:
- Sealing in Barking
- Sealing in Becontree
- Sealing in Leytonstone
- Sealing in Stratford
- Sealing in Canning Town
- Sealing in Dagenham
