Greater London · Lift and re-lay

Lift and re-lay block paving in Ilford

Before you replace a block drive in Ilford, ask whether it can be repaired: re-levelling and re-laying often cost far less than new paving.

  • Postcodes IG1, E12, IG2
  • £40–£95 per m² inc VAT
  • Free survey for new paving
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

Lift and re-lay block paving in Ilford: the local picture

Across Ilford, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.

Many London streets have controlled parking and narrow frontages, so we measure the car space and the crossover before anything else.

How much does a lift and re-lay job cost in Ilford?

Guide price in Ilford£40–£95 per m²Including VAT at 20%

Most lift and re-lay job quotes in London fall within £40–£95 per m² including VAT. 30 m² re-laid would usually be about £1,250–£2,900, with any extras listed separately on your quote.

ItemGuide price inc VAT
Lift and re-lay on a sound base£40–£95 per m²
Small repair (a few blocks or a short trench)£240–£780
Sunken or rutted patch repaired£360–£1,450
Lift and re-lay with sub-base rebuilt£70–£130 per m²

Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.

  • New screeded laying course
  • Sub-base repaired or rebuilt where needed
  • Jointing sand and compaction
  • Lifting, cleaning and stacking
  • Blocks relaid, new cuts made, edges re-set

Before we price your lift and re-lay job

  • What caused the dip or movement: base, laying course, edging or drains
  • Whether a drain or gully is leaking under the paving
  • Condition and thickness of your existing blocks
  • Trees, roots and past trenches
  • Falls, so water does not collect again

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

How we work

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Lift and re-lay in Ilford: questions

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Do you cover Barking, Becontree and Leytonstone?

Yes. We cover Ilford and the places around it, including Barking, Becontree and Leytonstone, and the rest of Greater London.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

How much does a lift and re-lay job cost in Ilford?

Our guide is £40–£95 per m² including VAT. Small repairs are often priced from photos.

Lift and re-lay near Ilford

Nearby towns we cover for lift and re-lay, and lift and re-lay across Greater London:

Other block paving services in Ilford

Or see all block paving services in Ilford.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Ilford, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote