Lift and re-lay block paving in Barking: the local picture
Barking has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Many London streets have controlled parking and narrow frontages, so we measure the car space and the crossover before anything else.
How much does a lift and re-lay job cost in Barking?
For Barking, our guide is £40–£95 per m² including VAT, so 30 m² re-laid is likely to be £1,250–£2,900. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £40–£95 per m² |
| Small repair (a few blocks or a short trench) | £240–£780 |
| Sunken or rutted patch repaired | £360–£1,450 |
| Lift and re-lay with sub-base rebuilt | £70–£130 per m² |
Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.
- New screeded laying course
- Lifting, cleaning and stacking
- Jointing sand and compaction
- Blocks relaid, new cuts made, edges re-set
- Sub-base repaired or rebuilt where needed
What we look at first in Barking
- Whether a drain or gully is leaking under the paving
- Condition and thickness of your existing blocks
- What caused the dip or movement: base, laying course, edging or drains
- Trees, roots and past trenches
- Whether the edging has moved or was never set in concrete
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Lift and re-lay in Barking: questions
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
How much does a lift and re-lay job cost in Barking?
Our guide is £40–£95 per m² including VAT. Small repairs are often priced from photos.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Do you cover Ilford, Becontree and Thamesmead?
Yes. We cover Barking and the places around it, including Ilford, Becontree and Thamesmead, and the rest of Greater London.
Lift and re-lay near Barking
Nearby towns we cover for lift and re-lay, and lift and re-lay across Greater London:
- Lift and re-lay in Ilford
- Lift and re-lay in Becontree
- Lift and re-lay in Thamesmead
- Lift and re-lay in Canning Town
- Lift and re-lay in Stratford
- Lift and re-lay in Dagenham
