Planning a lift and re-lay job in Thamesmead
Homes in Thamesmead include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Front gardens in much of London are short, so parking depth and the dropped kerb usually decide whether a drive is possible.
How much does a lift and re-lay job cost in Thamesmead?
For Thamesmead, our guide is £40–£95 per m² including VAT, so 30 m² re-laid is likely to be £1,250–£2,900. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £40–£95 per m² |
| Small repair (a few blocks or a short trench) | £240–£780 |
| Sunken or rutted patch repaired | £360–£1,450 |
| Lift and re-lay with sub-base rebuilt | £70–£130 per m² |
Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.
What does a lift and re-lay job involve?
Lift and re-lay means taking up an existing block paved area, cleaning and stacking the blocks, correcting the bed and the sub-base, and laying the same blocks back down. When the blocks are still sound, it fixes widespread sinking, rocking and uneven joints for less than a new drive, because the blocks themselves are re-used.
- Blocks relaid, new cuts made, edges re-set
- New screeded laying course
- Lifting, cleaning and stacking
- Jointing sand and compaction
- Survey of the blocks: thickness, damage and whether they are worth re-using
Before we price your lift and re-lay job
- Condition and thickness of your existing blocks
- Falls, so water does not collect again
- Whether the edging has moved or was never set in concrete
- Trees, roots and past trenches
- How much of the area needs lifting to blend the repair
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Lift and re-lay in Thamesmead: questions
Do you cover Barking, Welling and Becontree?
Yes. We cover Thamesmead and the places around it, including Barking, Welling and Becontree, and the rest of Greater London.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Can you repair block paving in Thamesmead without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Lift and re-lay near Thamesmead
Nearby towns we cover for lift and re-lay, and lift and re-lay across Greater London:
- Lift and re-lay in Barking
- Lift and re-lay in Welling
- Lift and re-lay in Becontree
- Lift and re-lay in Dagenham
- Lift and re-lay in Ilford
- Lift and re-lay in Canning Town
