Sunken and rutted block paving in Romford: the local picture
Romford has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
Many London streets have controlled parking and narrow frontages, so we measure the car space and the crossover before anything else.
How much does a sunken area repair cost in Romford?
Most sunken area repair quotes in London fall within £360–£1,450 including VAT, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £360–£1,450 |
| Small repair (a few blocks or a short trench) | £240–£780 |
| Lift and re-lay on a sound base | £40–£95 per m² |
| Lift and re-lay with sub-base rebuilt | £70–£130 per m² |
Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sunken paving service
Common causes are a sub-base that was too thin or not compacted, a laying course that was too thick, water washing sand out through a broken drain, or a trench that was never properly filled. Re-levelling means lifting the blocks in and around the dip, finding and fixing the cause, rebuilding and compacting the layers, and relaying the same blocks so they match.
- Sub-base dug out and rebuilt where it has failed
- Same blocks relaid, re-jointed and compacted
- Investigation of the cause (drain, sub-base, laying course, edging)
- New laying course screeded to the correct level and falls
- Blocks lifted, cleaned and stacked for re-use
How we find the cause
- Falls, so water does not collect again
- Whether the edging has moved or was never set in concrete
- What caused the dip or movement: base, laying course, edging or drains
- Condition and thickness of your existing blocks
- How much of the area needs lifting to blend the repair
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Sunken paving in Romford: questions
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Do you cover Dagenham, Becontree and Ilford?
Yes. We cover Romford and the places around it, including Dagenham, Becontree and Ilford, and the rest of Greater London.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Can you repair block paving in Romford without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Sunken paving near Romford
Nearby towns we cover for sunken paving, and sunken paving across Greater London:
- Sunken paving in Dagenham
- Sunken paving in Becontree
- Sunken paving in Ilford
- Sunken paving in Barking
- Sunken paving in Thamesmead
- Sunken paving in Leytonstone
