East Sussex · Permeable paving

Permeable block paving in Seaford

Thinking about permeable block drives in Seaford? We survey, specify and build them for homeowners across Seaford and the surrounding BN postcodes, with the dig depth, sub-base, edging and drainage written into your quote.

  • Postcodes BN25, BN9
  • £115–£185 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

Permeable block paving in Seaford: the local picture

Around Seaford, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a permeable block drive cost in Seaford?

Guide price in Seaford£115–£185 per m²Including VAT at 20%

Guide price in Seaford: £115–£185 per m² including VAT, which puts a 50 m² drive at about £5,650–£9,200. These are South East guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Permeable block paving driveway£115–£185 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.

  • Grit laying course and permeable blocks with grit-filled joints
  • Open-graded crushed stone (no fines) laid and compacted in layers
  • Edge restraints and any overflow or outlet the design needs
  • Ground check: how well the soil drains and how high the water table sits
  • Geotextile layer where the design needs one

Before we price your permeable block drive

  • Access for a mini-digger, skip or grab lorry
  • The kerb: is it already dropped, and is it wide enough?
  • Block range, thickness, colour and pattern to suit the house
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Where an electric vehicle charger cable might run

Planning and kerb rules in Seaford

Seaford is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

How we work

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Permeable paving in Seaford: questions

How much does a permeable block drive cost in Seaford?

Our guide for Seaford is £115–£185 per m² including VAT, so a 50 m² drive is usually about £5,650–£9,200. Your fixed price follows the survey.

How long does a permeable block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do I need planning permission for a permeable block drive in Seaford?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Is the survey in Seaford free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Permeable paving near Seaford

Nearby towns we cover for permeable paving, and permeable paving across East Sussex:

Other block paving services in Seaford

Or see all block paving services in Seaford.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Seaford.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote