East Sussex · Cleaning

Block paving cleaning in Seaford

For drives and patios in Seaford and Rottingdean, we treat cleaning, re-sanding and sealing as one job so the paving looks good for longer.

  • Postcodes BN25, BN9
  • £2.50–£5.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Seaford: what to expect

Seaford is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

How much does a block paving cleaning job cost in Seaford?

Guide price in Seaford£2.50–£5.50 per m²Including VAT at 20%

Most block paving cleaning job quotes in the South East fall within £2.50–£5.50 per m² including VAT. A 50 m² drive would usually be about £135–£270, with any extras listed separately on your quote.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5.50 per m²
Clean and re-sand£5.50–£11 per m²
Clean, re-sand and seal£8.50–£20 per m²
Sealing only£5.50–£16 per m²

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Weeds and moss removed from the joints
  • Rotary surface clean at a pressure that will not blow out the joints
  • Optional biocide and sealer
  • Rinse down of edges, steps and walls
  • Kiln-dried sand brushed in once dry (re-sanding package)

What we look at first in Seaford

  • Which sealer finish suits a slope or patio
  • Moss, algae, weeds and oil staining
  • Walls, doors and planting to protect
  • How much joint sand is left
  • Whether any blocks are loose or sunken first

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Cleaning in Seaford: questions

How often should block paving in Seaford be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How much does a block paving cleaning job cost in Seaford?

Guide price for Seaford: £2.50–£5.50 per m² including VAT, with a minimum charge for small areas.

Cleaning near Seaford

Nearby towns we cover for cleaning, and cleaning across East Sussex:

Other block paving services in Seaford

Or see all block paving services in Seaford.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote