East Sussex · Cleaning

Block paving cleaning in Brighton

For drives and patios in Brighton and Hove, we treat cleaning, re-sanding and sealing as one job so the paving looks good for longer.

  • Postcodes BN1, BN2
  • £2.50–£5.50 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Planning a block paving cleaning job in Brighton

Brighton has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

How much does a block paving cleaning job cost in Brighton?

Guide price in Brighton£2.50–£5.50 per m²Including VAT at 20%

Most block paving cleaning job quotes in the South East fall within £2.50–£5.50 per m² including VAT. A 50 m² drive would usually be about £135–£270, with any extras listed separately on your quote.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5.50 per m²
Clean and re-sand£5.50–£11 per m²
Clean, re-sand and seal£8.50–£20 per m²
Sealing only£5.50–£16 per m²

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Rotary surface clean at a pressure that will not blow out the joints
  • Pre-treatment where needed
  • Weeds and moss removed from the joints
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Optional biocide and sealer

What we look at first in Brighton

  • Moss, algae, weeds and oil staining
  • Walls, doors and planting to protect
  • Whether any blocks are loose or sunken first
  • Shade and drainage, which affect regrowth
  • Type of block and its age

What happens next

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Cleaning in Brighton: questions

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How much does a block paving cleaning job cost in Brighton?

Guide price for Brighton: £2.50–£5.50 per m² including VAT, with a minimum charge for small areas.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How often should block paving in Brighton be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Cleaning near Brighton

Nearby towns we cover for cleaning, and cleaning across East Sussex:

Other block paving services in Brighton

Or see all block paving services in Brighton.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Brighton, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote