Block paving sealing in Brighton: the local picture
Brighton has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
How much does a block paving sealing job cost in Brighton?
In the South East, a block paving sealing job usually costs £5.50–£16 per m² including VAT. For a 50 m² drive, that is roughly £270–£810. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5.50–£16 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sealing block paving means applying a clear liquid sealer to clean, dry paving. A good sealer soaks into the blocks and the jointing sand, binding the sand so it does not wash out, reducing staining and making the surface easier to keep clean. Some sealers also deepen the colour or leave a light sheen.
- Second coat where the product requires it
- Sealer applied evenly by roller or low-pressure sprayer
- Drying time and a date when cars can return
- Check that the paving is clean, re-sanded and dry
- Edges, walls and doors protected
Before we price your block paving sealing job
- Type of block and its age
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- How much joint sand is left
- Moss, algae, weeds and oil staining
- Whether any blocks are loose or sunken first
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Sealing in Brighton: questions
How often should block paving in Brighton be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving sealing job cost in Brighton?
Guide price for Brighton: £5.50–£16 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Do you cover Hove, Portslade and Rottingdean?
Yes. We cover Brighton and the places around it, including Hove, Portslade and Rottingdean, and the rest of East Sussex.
Sealing near Brighton
Nearby towns we cover for sealing, and sealing across East Sussex:
- Sealing in Hove
- Sealing in Portslade
- Sealing in Rottingdean
- Sealing in Seaford
- Sealing in Hailsham
- Sealing in Eastbourne
