Planning a block paving sealing job in Hove
Hove has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.
How much does a block paving sealing job cost in Hove?
In the South East, a block paving sealing job usually costs £5.50–£16 per m² including VAT. For a 50 m² drive, that is roughly £270–£810. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5.50–£16 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Edges, walls and doors protected
- Check that the paving is clean, re-sanded and dry
- Sealer applied evenly by roller or low-pressure sprayer
- Second coat where the product requires it
- Drying time and a date when cars can return
Before we price your block paving sealing job
- Moss, algae, weeds and oil staining
- Type of block and its age
- How much joint sand is left
- Which sealer finish suits a slope or patio
- Whether the paving is permeable (no sand, no sealing with the wrong product)
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
Repair before replace
If your drive can be fixed or re-laid, we will say so.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Sealing in Hove: questions
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Do you cover Brighton, Portslade and Rottingdean?
Yes. We cover Hove and the places around it, including Brighton, Portslade and Rottingdean, and the rest of East Sussex.
How much does a block paving sealing job cost in Hove?
Guide price for Hove: £5.50–£16 per m² including VAT, with a minimum charge for small areas.
How often should block paving in Hove be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Sealing near Hove
Nearby towns we cover for sealing, and sealing across East Sussex:
- Sealing in Brighton
- Sealing in Portslade
- Sealing in Rottingdean
- Sealing in Seaford
- Sealing in Hailsham
- Sealing in Eastbourne
