East Sussex · Lift and re-lay

Lift and re-lay block paving in Hove

When a block drive in Hove or nearby Brighton starts to dip or rattle, the blocks are rarely the problem; the bed and base usually are.

  • Postcodes BN3
  • £40–£85 per m² inc VAT
  • Free survey for new paving
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

Lift and re-lay block paving in Hove: what to expect

Hove has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a lift and re-lay job cost in Hove?

Guide price in Hove£40–£85 per m²Including VAT at 20%

Most lift and re-lay job quotes in the South East fall within £40–£85 per m² including VAT. 30 m² re-laid would usually be about £1,150–£2,600, with any extras listed separately on your quote.

ItemGuide price inc VAT
Lift and re-lay on a sound base£40–£85 per m²
Small repair (a few blocks or a short trench)£215–£700
Sunken or rutted patch repaired£320–£1,300
Lift and re-lay with sub-base rebuilt£65–£120 per m²

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our lift and re-lay service

It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.

  • Blocks relaid, new cuts made, edges re-set
  • Survey of the blocks: thickness, damage and whether they are worth re-using
  • Lifting, cleaning and stacking
  • Jointing sand and compaction
  • New screeded laying course

What we look at first in Hove

  • Condition and thickness of your existing blocks
  • How much of the area needs lifting to blend the repair
  • Replacement blocks or hidden blocks to swap in
  • Falls, so water does not collect again
  • Whether the edging has moved or was never set in concrete

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

What you can expect from us

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Lift and re-lay in Hove: questions

How much does a lift and re-lay job cost in Hove?

Our guide is £40–£85 per m² including VAT. Small repairs are often priced from photos.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Do you cover Brighton, Portslade and Rottingdean?

Yes. We cover Hove and the places around it, including Brighton, Portslade and Rottingdean, and the rest of East Sussex.

Lift and re-lay near Hove

Nearby towns we cover for lift and re-lay, and lift and re-lay across East Sussex:

Other block paving services in Hove

Or see all block paving services in Hove.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Hove.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote