Lift and re-lay block paving in Portslade: what to expect
Around Portslade, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.
How much does a lift and re-lay job cost in Portslade?
Most lift and re-lay job quotes in the South East fall within £40–£85 per m² including VAT. 30 m² re-laid would usually be about £1,150–£2,600, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £40–£85 per m² |
| Small repair (a few blocks or a short trench) | £215–£700 |
| Sunken or rutted patch repaired | £320–£1,300 |
| Lift and re-lay with sub-base rebuilt | £65–£120 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our lift and re-lay service
Lift and re-lay means taking up an existing block paved area, cleaning and stacking the blocks, correcting the bed and the sub-base, and laying the same blocks back down. When the blocks are still sound, it fixes widespread sinking, rocking and uneven joints for less than a new drive, because the blocks themselves are re-used.
- Sub-base repaired or rebuilt where needed
- Survey of the blocks: thickness, damage and whether they are worth re-using
- Blocks relaid, new cuts made, edges re-set
- Lifting, cleaning and stacking
- Jointing sand and compaction
How we find the cause
- Whether a drain or gully is leaking under the paving
- How much of the area needs lifting to blend the repair
- Replacement blocks or hidden blocks to swap in
- What caused the dip or movement: base, laying course, edging or drains
- Condition and thickness of your existing blocks
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Lift and re-lay in Portslade: questions
Do you cover Hove, Brighton and Rottingdean?
Yes. We cover Portslade and the places around it, including Hove, Brighton and Rottingdean, and the rest of East Sussex.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
How much does a lift and re-lay job cost in Portslade?
Our guide is £40–£85 per m² including VAT. Small repairs are often priced from photos.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Lift and re-lay near Portslade
Nearby towns we cover for lift and re-lay, and lift and re-lay across East Sussex:
- Lift and re-lay in Hove
- Lift and re-lay in Brighton
- Lift and re-lay in Rottingdean
- Lift and re-lay in Seaford
- Lift and re-lay in Hailsham
- Lift and re-lay in Crowborough
