Cheshire · Permeable paving

Permeable block paving in Crewe

Thinking about permeable block drives in Crewe? We survey, specify and build them for homeowners across Crewe and the surrounding CW postcodes, with the dig depth, sub-base, edging and drainage written into your quote.

  • Postcodes CW1, CW2, CW5
  • £105–£170 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

What to know before a permeable block drive in Crewe

Crewe has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.

Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.

How much does a permeable block drive cost in Crewe?

Guide price in Crewe£105–£170 per m²Including VAT at 20%

Guide price in Crewe: £105–£170 per m² including VAT, which puts a 50 m² drive at about £5,250–£8,500. These are North West guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Permeable block paving driveway£105–£170 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our permeable paving service

Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.

  • Edge restraints and any overflow or outlet the design needs
  • Open-graded crushed stone (no fines) laid and compacted in layers
  • Ground check: how well the soil drains and how high the water table sits
  • Grit laying course and permeable blocks with grit-filled joints
  • Deeper dig-out for the open-graded sub-base

What we check on a Crewe survey

  • Trees and roots near the drive
  • Whether front-garden planning rules apply
  • The kerb: is it already dropped, and is it wide enough?
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Block range, thickness, colour and pattern to suit the house

Planning and kerb rules in Crewe

Crewe is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

What you can expect from us

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Permeable paving in Crewe: questions

How much does a permeable block drive cost in Crewe?

Our guide for Crewe is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,500. Your fixed price follows the survey.

How long does a permeable block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do you cover Winsford, Congleton and Northwich?

Yes. We cover Crewe and the places around it, including Winsford, Congleton and Northwich, and the rest of Cheshire.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Permeable paving near Crewe

Nearby towns we cover for permeable paving, and permeable paving across Cheshire:

Other block paving services in Crewe

Or see all block paving services in Crewe.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote