Lift and re-lay block paving in Crewe: the local picture
Across Crewe, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.
The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.
How much does a lift and re-lay job cost in Crewe?
In the North West, a lift and re-lay job usually costs £35–£80 per m² including VAT. For 30 m² re-laid, that is roughly £1,050–£2,400. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £35–£80 per m² |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Sunken or rutted patch repaired | £300–£1,200 |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our lift and re-lay service
It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.
- Blocks relaid, new cuts made, edges re-set
- Sub-base repaired or rebuilt where needed
- Jointing sand and compaction
- Lifting, cleaning and stacking
- Survey of the blocks: thickness, damage and whether they are worth re-using
How we find the cause
- How much of the area needs lifting to blend the repair
- Falls, so water does not collect again
- Whether a drain or gully is leaking under the paving
- Trees, roots and past trenches
- Replacement blocks or hidden blocks to swap in
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Lift and re-lay in Crewe: questions
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Do you cover Winsford, Congleton and Northwich?
Yes. We cover Crewe and the places around it, including Winsford, Congleton and Northwich, and the rest of Cheshire.
Can you repair block paving in Crewe without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Lift and re-lay near Crewe
Nearby towns we cover for lift and re-lay, and lift and re-lay across Cheshire:
- Lift and re-lay in Winsford
- Lift and re-lay in Congleton
- Lift and re-lay in Northwich
- Lift and re-lay in Macclesfield
- Lift and re-lay in Wilmslow
- Lift and re-lay in Chester
