Planning a sunken area repair in Crewe
Crewe has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.
How much does a sunken area repair cost in Crewe?
Guide price in Crewe: £300–£1,200 including VAT. These are North West guide figures; the survey or your photos confirm the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £300–£1,200 |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Common causes are a sub-base that was too thin or not compacted, a laying course that was too thick, water washing sand out through a broken drain, or a trench that was never properly filled. Re-levelling means lifting the blocks in and around the dip, finding and fixing the cause, rebuilding and compacting the layers, and relaying the same blocks so they match.
- New laying course screeded to the correct level and falls
- Blocks lifted, cleaned and stacked for re-use
- Same blocks relaid, re-jointed and compacted
- Investigation of the cause (drain, sub-base, laying course, edging)
- Sub-base dug out and rebuilt where it has failed
How we find the cause
- Whether the edging has moved or was never set in concrete
- Falls, so water does not collect again
- What caused the dip or movement: base, laying course, edging or drains
- Replacement blocks or hidden blocks to swap in
- Condition and thickness of your existing blocks
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Sunken paving in Crewe: questions
Can you repair block paving in Crewe without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Do you cover Winsford, Congleton and Northwich?
Yes. We cover Crewe and the places around it, including Winsford, Congleton and Northwich, and the rest of Cheshire.
How much does a sunken area repair cost in Crewe?
Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.
Sunken paving near Crewe
Nearby towns we cover for sunken paving, and sunken paving across Cheshire:
- Sunken paving in Winsford
- Sunken paving in Congleton
- Sunken paving in Northwich
- Sunken paving in Macclesfield
- Sunken paving in Wilmslow
- Sunken paving in Chester
