Permeable block paving in Dunstable: the local picture
Homes in Dunstable include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.
How much does a permeable block drive cost in Dunstable?
In the East of England, a permeable block drive usually costs £110–£180 per m² including VAT. For a 50 m² drive, that is roughly £5,500–£8,950. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £110–£180 per m² |
| Breaking out an old surface | £11–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £370–£1,050 |
| Dropped kerb (vehicle crossover) construction | £1,050–£3,150 |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What does a permeable block drive involve?
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Grit laying course and permeable blocks with grit-filled joints
- Geotextile layer where the design needs one
- Deeper dig-out for the open-graded sub-base
- Edge restraints and any overflow or outlet the design needs
- Ground check: how well the soil drains and how high the water table sits
Before we price your permeable block drive
- Trees and roots near the drive
- Where rain will go: falls, lawn, border, channel or soakaway
- The kerb: is it already dropped, and is it wide enough?
- Access for a mini-digger, skip or grab lorry
- Existing manhole and inspection covers, and whether to recess them
Planning and kerb rules in Dunstable
Dunstable is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Permeable paving in Dunstable: questions
Do you cover Luton, Leighton Buzzard and Ampthill?
Yes. We cover Dunstable and the places around it, including Luton, Leighton Buzzard and Ampthill, and the rest of Bedfordshire.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Can you match the blocks to my house in Dunstable?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Do I need planning permission for a permeable block drive in Dunstable?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Permeable paving near Dunstable
Nearby towns we cover for permeable paving, and permeable paving across Bedfordshire:
- Permeable paving in Luton
- Permeable paving in Leighton Buzzard
- Permeable paving in Ampthill
- Permeable paving in Kempston
- Permeable paving in Bedford
