Planning a block paved driveway in Dunstable
Dunstable is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Clay soils are common in parts of the East of England, so drainage and sub-base depth get extra attention.
How much does a block paved driveway cost in Dunstable?
Expect block paved driveways in Dunstable to come in at around £90–£145 per m², including VAT at 20%. As an example, a 50 m² double drive usually comes to between £4,450 and £7,350.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £90–£145 per m² |
| Breaking out an old surface | £11–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £370–£1,050 |
| Dropped kerb (vehicle crossover) construction | £1,050–£3,150 |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paved driveway involve?
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Blocks laid in your chosen pattern, with a contrasting border if wanted
- Cuts at edges, around covers and against the house
- Sharp-sand laying course screeded to falls
- Edge restraints or kerbs bedded and haunched in concrete
- Crushed-stone sub-base laid in layers and compacted
Before we price your block paved driveway
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Trees and roots near the drive
- Edges against lawns, beds, walls and neighbours
- The kerb: is it already dropped, and is it wide enough?
- Steps, thresholds and door heights
Do you need permission in Dunstable?
Dunstable is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Block paved driveways in Dunstable: questions
Do I need planning permission for a block paved driveway in Dunstable?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Dunstable?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Block paved driveways near Dunstable
Nearby towns we cover for block paved driveways, and block paved driveways across Bedfordshire:
- Block paved driveways in Luton
- Block paved driveways in Leighton Buzzard
- Block paved driveways in Ampthill
- Block paved driveways in Kempston
- Block paved driveways in Bedford
