Planning a block paving sealing job in Dunstable
Homes in Dunstable include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.
How much does a block paving sealing job cost in Dunstable?
Most block paving sealing job quotes in the East of England fall within £5.50–£16 per m² including VAT. A 50 m² drive would usually be about £265–£790, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5.50–£16 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Edges, walls and doors protected
- Sealer applied evenly by roller or low-pressure sprayer
- Second coat where the product requires it
- Drying time and a date when cars can return
- Check that the paving is clean, re-sanded and dry
What we look at first in Dunstable
- Which sealer finish suits a slope or patio
- Walls, doors and planting to protect
- How much joint sand is left
- Shade and drainage, which affect regrowth
- Type of block and its age
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Sealing in Dunstable: questions
Do you cover Luton, Leighton Buzzard and Ampthill?
Yes. We cover Dunstable and the places around it, including Luton, Leighton Buzzard and Ampthill, and the rest of Bedfordshire.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How much does a block paving sealing job cost in Dunstable?
Guide price for Dunstable: £5.50–£16 per m² including VAT, with a minimum charge for small areas.
Sealing near Dunstable
Nearby towns we cover for sealing, and sealing across Bedfordshire:
