Planning a lift and re-lay job in Port Glasgow
Around Port Glasgow, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a lift and re-lay job cost in Port Glasgow?
For Port Glasgow, our guide is £35–£80 per m² including VAT, so 30 m² re-laid is likely to be £1,050–£2,400. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £35–£80 per m² |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Sunken or rutted patch repaired | £300–£1,200 |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Lift and re-lay means taking up an existing block paved area, cleaning and stacking the blocks, correcting the bed and the sub-base, and laying the same blocks back down. When the blocks are still sound, it fixes widespread sinking, rocking and uneven joints for less than a new drive, because the blocks themselves are re-used.
- Blocks relaid, new cuts made, edges re-set
- Survey of the blocks: thickness, damage and whether they are worth re-using
- New screeded laying course
- Sub-base repaired or rebuilt where needed
- Lifting, cleaning and stacking
How we find the cause
- Trees, roots and past trenches
- Falls, so water does not collect again
- How much of the area needs lifting to blend the repair
- Whether the edging has moved or was never set in concrete
- What caused the dip or movement: base, laying course, edging or drains
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Lift and re-lay in Port Glasgow: questions
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
How much does a lift and re-lay job cost in Port Glasgow?
Our guide is £35–£80 per m² including VAT. Small repairs are often priced from photos.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Do you cover Greenock, Gourock and Erskine?
Yes. We cover Port Glasgow and the places around it, including Greenock, Gourock and Erskine, and the rest of Renfrewshire and Inverclyde.
Lift and re-lay near Port Glasgow
Nearby towns we cover for lift and re-lay, and lift and re-lay across Renfrewshire and Inverclyde:
- Lift and re-lay in Greenock
- Lift and re-lay in Gourock
- Lift and re-lay in Erskine
- Lift and re-lay in Johnstone
- Lift and re-lay in Paisley
- Lift and re-lay in Renfrew
