Planning a block paving repair in Port Glasgow
In and around Port Glasgow, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paving repair cost in Port Glasgow?
Guide price in Port Glasgow: £200–£650 including VAT. These are Scotland guide figures; the survey or your photos confirm the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Small repair (a few blocks or a short trench) | £200–£650 |
| Sunken or rutted patch repaired | £300–£1,200 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Block paving repairs fix local damage: cracked or broken blocks, loose blocks that rock, oil or rust stains, and trenches left after a utility company or builder has dug through the drive. Because each block is separate, a damaged area can be lifted, the bed corrected and the blocks relaid or replaced, without breaking out the whole drive.
- Re-jointing and compaction of the repaired area
- Laying course corrected and re-screeded
- Damaged blocks cut out without breaking neighbours
- Replacement blocks matched as closely as possible, or sound blocks re-used
- Diagnosis from photos or a visit
Before we price your block paving repair
- How much of the area needs lifting to blend the repair
- Trees, roots and past trenches
- Replacement blocks or hidden blocks to swap in
- Whether the edging has moved or was never set in concrete
- Falls, so water does not collect again
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Repairs in Port Glasgow: questions
Do you cover Greenock, Gourock and Erskine?
Yes. We cover Port Glasgow and the places around it, including Greenock, Gourock and Erskine, and the rest of Renfrewshire and Inverclyde.
How much does a block paving repair cost in Port Glasgow?
Our guide is £200–£650 including VAT. Small repairs are often priced from photos.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Can you repair block paving in Port Glasgow without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Repairs near Port Glasgow
Nearby towns we cover for repairs, and repairs across Renfrewshire and Inverclyde:
- Repairs in Greenock
- Repairs in Gourock
- Repairs in Erskine
- Repairs in Johnstone
- Repairs in Paisley
- Repairs in Renfrew
