How much does a cobble-effect block drive cost in Renfrewshire and Inverclyde?
For Renfrewshire and Inverclyde, our guide is £100–£160 per m² including VAT, so a 50 m² drive is likely to be £5,000–£8,000. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Tumbled or cobble-effect concrete block driveway | £100–£160 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Renfrewshire and Inverclyde
We quote cobble-effect paving in every town across Renfrewshire and Inverclyde, including:
What is included?
The softer look suits cottages, barn conversions and curved drives, where the rounded edges hide the many cuts a curve needs. Because the blocks come in several sizes, they take longer to lay than standard blocks, and that shows in the price per square metre.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
- Colour and size mix chosen on the survey
- Edge cuts blended into curves and corners
- Mixed sizes laid to a planned random or coursed pattern
- Dig-out, sub-base and edging as for any block drive
- Jointing sand and compaction
What the survey covers
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Existing manhole and inspection covers, and whether to recess them
- Ground conditions under the old surface and how deep the sub-base must be
- Trees and roots near the drive
- Steps, thresholds and door heights
Rules for front drives in Renfrewshire and Inverclyde
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Cobble-effect paving in Renfrewshire and Inverclyde: questions
How long does a cobble-effect block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Is the survey in Renfrewshire and Inverclyde free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Can you match the blocks to my house in Renfrewshire and Inverclyde?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Do you cover Paisley, Greenock and Newton Mearns?
Yes. We cover all of Renfrewshire and Inverclyde, including Paisley, Greenock and Newton Mearns.
