How much does a cobble-effect block drive cost in Ayrshire?
Most cobble-effect block drive quotes in Scotland fall within £100–£160 per m² including VAT. A 50 m² drive would usually be about £5,000–£8,000, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Tumbled or cobble-effect concrete block driveway | £100–£160 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Ayrshire
We quote cobble-effect paving in every town across Ayrshire, including:
What is included?
Tumbled block paving is concrete block that has been rumbled or treated after making so the edges are rounded and the faces look worn. Cobble-effect ranges add three or more block sizes laid in a random or coursed pattern, which gives the look of old setts without their cost or rough surface.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
- Mixed sizes laid to a planned random or coursed pattern
- Dig-out, sub-base and edging as for any block drive
- Jointing sand and compaction
- Edge cuts blended into curves and corners
- Colour and size mix chosen on the survey
What the survey covers
- Access for a mini-digger, skip or grab lorry
- Steps, thresholds and door heights
- Ground conditions under the old surface and how deep the sub-base must be
- The kerb: is it already dropped, and is it wide enough?
- Trees and roots near the drive
Rules for front drives in Ayrshire
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Cobble-effect paving in Ayrshire: questions
Do you cover Kilmarnock, Ayr and Irvine?
Yes. We cover all of Ayrshire, including Kilmarnock, Ayr and Irvine.
Do I need planning permission for a cobble-effect block drive in Ayrshire?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
Is the survey in Ayrshire free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Can you match the blocks to my house in Ayrshire?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
