How much does a cobble-effect block drive cost in Glasgow and Dunbartonshire?
Guide price in Glasgow and Dunbartonshire: £100–£160 per m² including VAT, which puts a 50 m² drive at about £5,000–£8,000. These are Scotland guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Tumbled or cobble-effect concrete block driveway | £100–£160 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Glasgow and Dunbartonshire
We quote cobble-effect paving in every town across Glasgow and Dunbartonshire, including:
What is included?
Tumbled block paving is concrete block that has been rumbled or treated after making so the edges are rounded and the faces look worn. Cobble-effect ranges add three or more block sizes laid in a random or coursed pattern, which gives the look of old setts without their cost or rough surface.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
- Mixed sizes laid to a planned random or coursed pattern
- Dig-out, sub-base and edging as for any block drive
- Colour and size mix chosen on the survey
- Jointing sand and compaction
- Edge cuts blended into curves and corners
What the survey covers
- Steps, thresholds and door heights
- Access for a mini-digger, skip or grab lorry
- Existing manhole and inspection covers, and whether to recess them
- Block range, thickness, colour and pattern to suit the house
- Whether front-garden planning rules apply
Rules for front drives in Glasgow and Dunbartonshire
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Cobble-effect paving in Glasgow and Dunbartonshire: questions
Do I need planning permission for a cobble-effect block drive in Glasgow and Dunbartonshire?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
Do you cover Rutherglen, Bearsden and Clydebank?
Yes. We cover all of Glasgow and Dunbartonshire, including Rutherglen, Bearsden and Clydebank.
How long does a cobble-effect block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
How much does a cobble-effect block drive cost in Glasgow and Dunbartonshire?
Our guide for Glasgow and Dunbartonshire is £100–£160 per m² including VAT, so a 50 m² drive is usually about £5,000–£8,000. Your fixed price follows the survey.
