How much does a clay paver drive cost in Renfrewshire and Inverclyde?
In Scotland, a clay paver drive usually costs £115–£170 per m² including VAT. For a 40 m² drive, that is roughly £4,600–£6,800. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Clay paver driveway | £115–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Renfrewshire and Inverclyde
We quote clay pavers in every town across Renfrewshire and Inverclyde, including:
What is included?
Clay pavers are laid on the same kind of compacted sub-base and sand bed as concrete blocks, but they vary slightly more in size and are harder to cut cleanly, so laying takes longer and the cost per square metre is higher. They are a natural match for Victorian, Edwardian and Arts and Crafts houses.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
- Jointing sand brushed in and the surface compacted with a protective pad
- Clean cuts with a wet saw where the pattern meets edges and covers
- Advice on paver colour and size to suit the house
- Dig-out, edging and compacted sub-base
- Clay pavers laid in herringbone, basketweave or stretcher bond
What the survey covers
- Block range, thickness, colour and pattern to suit the house
- Where an electric vehicle charger cable might run
- Edges against lawns, beds, walls and neighbours
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Steps, thresholds and door heights
Rules for front drives in Renfrewshire and Inverclyde
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Clay pavers in Renfrewshire and Inverclyde: questions
Is the survey in Renfrewshire and Inverclyde free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How much does a clay paver drive cost in Renfrewshire and Inverclyde?
Our guide for Renfrewshire and Inverclyde is £115–£170 per m² including VAT, so a 40 m² drive is usually about £4,600–£6,800. Your fixed price follows the survey.
Can you match the blocks to my house in Renfrewshire and Inverclyde?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Do you cover Paisley, Greenock and Newton Mearns?
Yes. We cover all of Renfrewshire and Inverclyde, including Paisley, Greenock and Newton Mearns.
