How much does a clay paver drive cost in Argyll and Bute?
Expect clay paver drives in Argyll and Bute to come in at around £115–£170 per m², including VAT at 20%. As an example, a 40 m² drive usually comes to between £4,600 and £6,800.
| Item | Guide price inc VAT |
|---|---|
| Clay paver driveway | £115–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Argyll and Bute
We quote clay pavers in every town across Argyll and Bute, including:
What does a clay paver drive involve?
Clay block paving uses pavers made from fired clay rather than concrete. The colour runs right through the paver and does not fade, so a clay drive looks much the same after twenty years as it did when it was laid, and it weathers in the way a brick wall does.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
- Jointing sand brushed in and the surface compacted with a protective pad
- Clean cuts with a wet saw where the pattern meets edges and covers
- Clay pavers laid in herringbone, basketweave or stretcher bond
- Advice on paver colour and size to suit the house
- Dig-out, edging and compacted sub-base
What the survey covers
- Access for a mini-digger, skip or grab lorry
- Where an electric vehicle charger cable might run
- Steps, thresholds and door heights
- Block range, thickness, colour and pattern to suit the house
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
Rules for front drives in Argyll and Bute
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Clay pavers in Argyll and Bute: questions
How long does a clay paver drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do I need planning permission for a clay paver drive in Argyll and Bute?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
How much does a clay paver drive cost in Argyll and Bute?
Our guide for Argyll and Bute is £115–£170 per m² including VAT, so a 40 m² drive is usually about £4,600–£6,800. Your fixed price follows the survey.
