How much does a clay paver drive cost in Lanarkshire?
For Lanarkshire, our guide is £115–£170 per m² including VAT, so a 40 m² drive is likely to be £4,600–£6,800. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Clay paver driveway | £115–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Lanarkshire
We quote clay pavers in every town across Lanarkshire, including:
- East Kilbride
- Hamilton
- Cumbernauld
- Coatbridge
- Airdrie
- Motherwell
- Cambuslang
- Wishaw
- Bellshill
- Blantyre
- Larkhall
- Carluke
- Kilsyth
What is included?
Clay block paving uses pavers made from fired clay rather than concrete. The colour runs right through the paver and does not fade, so a clay drive looks much the same after twenty years as it did when it was laid, and it weathers in the way a brick wall does.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
- Clean cuts with a wet saw where the pattern meets edges and covers
- Jointing sand brushed in and the surface compacted with a protective pad
- Dig-out, edging and compacted sub-base
- Clay pavers laid in herringbone, basketweave or stretcher bond
- Advice on paver colour and size to suit the house
What the survey covers
- Where rain will go: falls, lawn, border, channel or soakaway
- Ground conditions under the old surface and how deep the sub-base must be
- Block range, thickness, colour and pattern to suit the house
- Existing manhole and inspection covers, and whether to recess them
- The kerb: is it already dropped, and is it wide enough?
Rules for front drives in Lanarkshire
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Clay pavers in Lanarkshire: questions
Do I need planning permission for a clay paver drive in Lanarkshire?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
How much does a clay paver drive cost in Lanarkshire?
Our guide for Lanarkshire is £115–£170 per m² including VAT, so a 40 m² drive is usually about £4,600–£6,800. Your fixed price follows the survey.
Is the survey in Lanarkshire free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Can you match the blocks to my house in Lanarkshire?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
