England · Block paved driveways

Block paving driveways in Surrey

Our block paving driveways service covers Surrey and nearby Woking, from first measurements to the final sweep of kiln-dried sand. You get a written, itemised quote before anything is booked.

  • 19 towns listed
  • £90–£150 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

How much does a block paved driveway cost in Surrey?

Guide price in Surrey£90–£150 per m²Including VAT at 20%

Guide price in Surrey: £90–£150 per m² including VAT, which puts a 50 m² double drive at about £4,600–£7,550. These are South East guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£90–£150 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026.

Towns we cover in Surrey

Choose a town for local prices and details for block paved driveways:

What is included?

We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

  • Removal of the old surface and soil to the agreed depth, with waste taken away
  • Crushed-stone sub-base laid in layers and compacted
  • Cuts at edges, around covers and against the house
  • Edge restraints or kerbs bedded and haunched in concrete
  • Survey, measurements and a written, itemised quote

What the survey covers

  • Ground conditions under the old surface and how deep the sub-base must be
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Where an electric vehicle charger cable might run
  • Edges against lawns, beds, walls and neighbours
  • Whether front-garden planning rules apply

Rules for front drives in Surrey

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Block paved driveways in Surrey: questions

How much does a block paved driveway cost in Surrey?

Our guide for Surrey is £90–£150 per m² including VAT, so a 50 m² double drive is usually about £4,600–£7,550. Your fixed price follows the survey.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Can you match the blocks to my house in Surrey?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

How long does a block paved driveway take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote