England · Block paved driveways

Block paving driveways in Hampshire

Block paving suits homes in Hampshire because it can be repaired a block at a time and looks right for decades when the base underneath is built properly.

  • 18 towns listed
  • £90–£150 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

How much does a block paved driveway cost in Hampshire?

Guide price in Hampshire£90–£150 per m²Including VAT at 20%

Most block paved driveway quotes in the South East fall within £90–£150 per m² including VAT. A 50 m² double drive would usually be about £4,600–£7,550, with any extras listed separately on your quote.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£90–£150 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026.

Towns we cover in Hampshire

Choose a town for local prices and details for block paved driveways:

What does a block paved driveway involve?

We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

  • Crushed-stone sub-base laid in layers and compacted
  • Sharp-sand laying course screeded to falls
  • Cuts at edges, around covers and against the house
  • Removal of the old surface and soil to the agreed depth, with waste taken away
  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor

What the survey covers

  • Existing manhole and inspection covers, and whether to recess them
  • The kerb: is it already dropped, and is it wide enough?
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Trees and roots near the drive
  • Where an electric vehicle charger cable might run

Rules for front drives in Hampshire

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Block paved driveways in Hampshire: questions

How long does a block paved driveway take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do I need planning permission for a block paved driveway in Hampshire?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

How much does a block paved driveway cost in Hampshire?

Our guide for Hampshire is £90–£150 per m² including VAT, so a 50 m² double drive is usually about £4,600–£7,550. Your fixed price follows the survey.

Is the survey in Hampshire free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then book a free survey to fix it in writing. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote