Planning a block paved driveway in Aldershot
In Aldershot, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
How much does a block paved driveway cost in Aldershot?
For Aldershot, our guide is £90–£150 per m² including VAT, so a 50 m² double drive is likely to be £4,600–£7,550. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £90–£150 per m² |
| Breaking out an old surface | £11–£45 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £380–£1,100 |
| Dropped kerb (vehicle crossover) construction | £1,100–£3,250 |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
- Survey, measurements and a written, itemised quote
- Cuts at edges, around covers and against the house
- Crushed-stone sub-base laid in layers and compacted
- Sharp-sand laying course screeded to falls
What the survey covers
- Existing manhole and inspection covers, and whether to recess them
- The kerb: is it already dropped, and is it wide enough?
- Ground conditions under the old surface and how deep the sub-base must be
- Where an electric vehicle charger cable might run
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
Do you need permission in Aldershot?
Aldershot is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Block paved driveways in Aldershot: questions
Do you cover Farnborough, Fleet and Yateley?
Yes. We cover Aldershot and the places around it, including Farnborough, Fleet and Yateley, and the rest of Hampshire.
How much does a block paved driveway cost in Aldershot?
Our guide for Aldershot is £90–£150 per m² including VAT, so a 50 m² double drive is usually about £4,600–£7,550. Your fixed price follows the survey.
Can you match the blocks to my house in Aldershot?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Block paved driveways near Aldershot
Nearby towns we cover for block paved driveways, and block paved driveways across Hampshire:
- Block paved driveways in Farnborough
- Block paved driveways in Fleet
- Block paved driveways in Yateley
- Block paved driveways in Bordon
- Block paved driveways in Basingstoke
