Planning a block paving sealing job in Aldershot
Aldershot is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
How much does a block paving sealing job cost in Aldershot?
Most block paving sealing job quotes in the South East fall within £5.50–£16 per m² including VAT. A 50 m² drive would usually be about £270–£810, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5.50–£16 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5.50 per m² |
| Clean and re-sand | £5.50–£11 per m² |
| Clean, re-sand and seal | £8.50–£20 per m² |
Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Drying time and a date when cars can return
- Sealer applied evenly by roller or low-pressure sprayer
- Second coat where the product requires it
- Check that the paving is clean, re-sanded and dry
- Edges, walls and doors protected
How we find the cause
- Moss, algae, weeds and oil staining
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Whether any blocks are loose or sunken first
- Walls, doors and planting to protect
- Which sealer finish suits a slope or patio
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Sealing in Aldershot: questions
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Do you cover Farnborough, Fleet and Yateley?
Yes. We cover Aldershot and the places around it, including Farnborough, Fleet and Yateley, and the rest of Hampshire.
How much does a block paving sealing job cost in Aldershot?
Guide price for Aldershot: £5.50–£16 per m² including VAT, with a minimum charge for small areas.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Sealing near Aldershot
Nearby towns we cover for sealing, and sealing across Hampshire:
