Surrey · Block paved driveways

Block paving driveways in Staines-upon-Thames

Thinking about block paved driveways in Staines-upon-Thames? We survey, specify and build them for homeowners across Staines-upon-Thames and the surrounding TW and KT postcodes, with the dig depth, sub-base, edging and drainage written into your quote.

  • Postcodes TW18, TW19, KT16
  • £90–£150 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Block paving driveways in Staines-upon-Thames: the local picture

In Staines-upon-Thames, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a block paved driveway cost in Staines-upon-Thames?

Guide price in Staines-upon-Thames£90–£150 per m²Including VAT at 20%

For Staines-upon-Thames, our guide is £90–£150 per m² including VAT, so a 50 m² double drive is likely to be £4,600–£7,550. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£90–£150 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our block paved driveways service

A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.

  • Blocks laid in your chosen pattern, with a contrasting border if wanted
  • Edge restraints or kerbs bedded and haunched in concrete
  • Removal of the old surface and soil to the agreed depth, with waste taken away
  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor
  • Cuts at edges, around covers and against the house

What the survey covers

  • Trees and roots near the drive
  • Block range, thickness, colour and pattern to suit the house
  • The kerb: is it already dropped, and is it wide enough?
  • Access for a mini-digger, skip or grab lorry
  • Existing manhole and inspection covers, and whether to recess them

Planning and kerb rules in Staines-upon-Thames

Staines-upon-Thames is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

What you can expect from us

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Block paved driveways in Staines-upon-Thames: questions

How much does a block paved driveway cost in Staines-upon-Thames?

Our guide for Staines-upon-Thames is £90–£150 per m² including VAT, so a 50 m² double drive is usually about £4,600–£7,550. Your fixed price follows the survey.

Can you match the blocks to my house in Staines-upon-Thames?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Is the survey in Staines-upon-Thames free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

How long does a block paved driveway take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Block paved driveways near Staines-upon-Thames

Nearby towns we cover for block paved driveways, and block paved driveways across Surrey:

Other block paving services in Staines-upon-Thames

Or see all block paving services in Staines-upon-Thames.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Staines-upon-Thames.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote