What to know before a block paved driveway in Milngavie
Milngavie is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paved driveway cost in Milngavie?
Guide price in Milngavie: £85–£140 per m² including VAT, which puts a 50 m² double drive at about £4,250–£7,000. These are Scotland guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our block paved driveways service
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Sharp-sand laying course screeded to falls
- Crushed-stone sub-base laid in layers and compacted
- Edge restraints or kerbs bedded and haunched in concrete
- Survey, measurements and a written, itemised quote
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
What the survey covers
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- The kerb: is it already dropped, and is it wide enough?
- Trees and roots near the drive
- Whether front-garden planning rules apply
- Existing manhole and inspection covers, and whether to recess them
Planning and kerb rules in Milngavie
Milngavie is in Scotland, so these rules apply:
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Block paved driveways in Milngavie: questions
How much does a block paved driveway cost in Milngavie?
Our guide for Milngavie is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do I need planning permission for a block paved driveway in Milngavie?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
Do you cover Bearsden, Clydebank and Bishopbriggs?
Yes. We cover Milngavie and the places around it, including Bearsden, Clydebank and Bishopbriggs, and the rest of Glasgow and Dunbartonshire.
Block paved driveways near Milngavie
Nearby towns we cover for block paved driveways, and block paved driveways across Glasgow and Dunbartonshire:
- Block paved driveways in Bearsden
- Block paved driveways in Clydebank
- Block paved driveways in Bishopbriggs
- Block paved driveways in Kirkintilloch
- Block paved driveways in Rutherglen
- Block paved driveways in Dumbarton
