Planning a lift and re-lay job in Milngavie
Milngavie is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a lift and re-lay job cost in Milngavie?
Guide price in Milngavie: £35–£80 per m² including VAT, which puts 30 m² re-laid at about £1,050–£2,400. These are Scotland guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £35–£80 per m² |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Sunken or rutted patch repaired | £300–£1,200 |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.
- Blocks relaid, new cuts made, edges re-set
- New screeded laying course
- Sub-base repaired or rebuilt where needed
- Jointing sand and compaction
- Lifting, cleaning and stacking
What we look at first in Milngavie
- Whether a drain or gully is leaking under the paving
- Replacement blocks or hidden blocks to swap in
- Whether the edging has moved or was never set in concrete
- Condition and thickness of your existing blocks
- How much of the area needs lifting to blend the repair
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Lift and re-lay in Milngavie: questions
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Can you repair block paving in Milngavie without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Do you cover Bearsden, Clydebank and Bishopbriggs?
Yes. We cover Milngavie and the places around it, including Bearsden, Clydebank and Bishopbriggs, and the rest of Glasgow and Dunbartonshire.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Lift and re-lay near Milngavie
Nearby towns we cover for lift and re-lay, and lift and re-lay across Glasgow and Dunbartonshire:
- Lift and re-lay in Bearsden
- Lift and re-lay in Clydebank
- Lift and re-lay in Bishopbriggs
- Lift and re-lay in Kirkintilloch
- Lift and re-lay in Rutherglen
- Lift and re-lay in Dumbarton
