Block paved driveways in Barrow-in-Furness

What to know before a block paved driveway in Barrow-in-Furness

Barrow-in-Furness is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.

How much does a block paved driveway cost in Barrow-in-Furness?

Guide price in Barrow-in-Furness£85–£140 per m²Including VAT at 20%

Guide price in Barrow-in-Furness: £85–£140 per m² including VAT, which puts a 50 m² double drive at about £4,250–£7,000. These are North West guide figures; the survey confirms the real price before you commit.

Item	Guide price inc VAT
Concrete block driveway, new sub-base	£85–£140 per m²
Breaking out an old surface	£10–£40 per m²
Edging or kerb, bedded and haunched	£20–£50 per metre
Typical channel drain run	£350–£1,000
Dropped kerb (vehicle crossover) construction	£1,000–£3,000

Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our block paved driveways service

We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.

Crushed-stone sub-base laid in layers and compacted
Removal of the old surface and soil to the agreed depth, with waste taken away
Kiln-dried sand brushed in and the surface vibrated with a plate compactor
Sharp-sand laying course screeded to falls
Cuts at edges, around covers and against the house

Before we price your block paved driveway

Block range, thickness, colour and pattern to suit the house
Access for a mini-digger, skip or grab lorry
Steps, thresholds and door heights
Whether front-garden planning rules apply
Trees and roots near the drive

Do you need permission in Barrow-in-Furness?

Barrow-in-Furness is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.